Hp tv remote codes: how to find and connect your remote

If you own a Hewlett Packard (HP) TV and need to program your remote control, you've come to the right place. Programming a universal remote may seem like a daunting task, but with the right instructions, it can be a simple and straightforward process. In this article, we will guide you through finding the TV remote code for your HP TV model and connecting your universal remote to your TV.

Content Index

How to Find the Code for Your HP TV Model

The first step in programming your universal remote is to find the correct code for your HP TV model. The method of finding the code may vary depending on the age of your TV.

For Older HP TVs:

If you have an older HP TV, you can find the code by looking at the back of the TV. The code is usually printed on a label or sticker. Look for a section labeled tv remote code or something similar. Once you have found the code, make a note of it as you will need it later.

For Newer HP TVs:

If you have a newer HP TV, the code can be found in the TV's settings menu. To access the settings menu, grab your TV's remote and follow these steps:

  1. Turn on your HP TV.
  2. Navigate to the Settings menu using the arrow keys on your remote.
  3. Select support from the menu options.
  4. Choose about this tv to display the model code.

Once you have located the model code, write it down as you will need it during the programming process.

Hewlett packard split: transformations & future of hpe and hp inc.

How to Connect Your Universal Remote to Your HP TV

Now that you have the TV remote code for your HP TV model, you can proceed to connect your universal remote. Follow these steps:

  1. Ensure that your universal remote has working batteries.
  2. Turn on the device you want to connect to your HP TV (e.g., a DVD player, a cable box, etc.).
  3. Place the device near your HP TV, ensuring there are no obstacles between the device and the remote.
  4. On your universal remote, press and hold the setup button until the indicator light turns on.
  5. Enter the TV remote code for your HP TV model using the numeric keypad on your universal remote. The indicator light should turn off if the code is entered correctly.
  6. Test the connection by pressing a few buttons on your universal remote to see if the device responds.

If the device responds correctly, congratulations! You have successfully connected your universal remote to your HP TV. If not, try entering the TV remote code again or consult the user manual for your universal remote for further troubleshooting steps.

Frequently Asked Questions

  • Q: Can I program my HP TV remote to control other devices?
  • A: Unfortunately, HP TV remotes are designed specifically for HP TVs and may not have the capability to control other devices. It is recommended to use a universal remote for controlling multiple devices.

  • Q: Can I use any universal remote to program my HP TV?
  • A: Yes, you can use any universal remote that supports programming for HP TVs. Ensure that the remote has the necessary features and functions to control your HP TV model.

  • Q: How do I reset my universal remote?
  • A: To reset your universal remote, remove the batteries and press all the buttons on the remote for a few seconds. Reinsert the batteries and try programming the remote again.

    Hewlett packard test equipment: legacy of innovation

Programming your HP TV remote doesn't have to be a complicated process. By following the steps outlined in this article, you can easily find the TV remote code for your HP TV model and connect your universal remote for convenient control of your devices. Enjoy your hassle-free TV viewing experience!

Go up

We use our own and third-party cookies to prepare statistical information and show you personalized content and services through navigation analysis. Accept them or set your preferences. More Information