Hewlett packard laserjet 100 color mfp m175nw: reliable wireless printing

If you are looking for a reliable and efficient printer for your home or small office, the Hewlett Packard LaserJet 100 Color MFP M175nw is a great choice. This all-in-one printer offers high-quality printing, scanning, and copying capabilities, all in a compact and stylish design. With its wireless connectivity feature, you can easily print from any device without the hassle of cables. In this article, we will guide you on how to connect your LaserJet 100 Color MFP M175nw to a wireless network, troubleshoot common issues, and reset the printer if needed.

Connecting your LaserJet 100 Color MFP M175nw to a wireless network

If you have recently reconfigured your router and are having trouble reconnecting your printer to the wireless network, follow these steps:

1. Restore the printer's network defaults:
   • Touch the Setup button (wrench icon) on the printer.
   • Select Network Setup Menu.
   • Then select Restore Defaults.
2. Print out a configuration report to ensure that the IPv4 address is 0.0.0.0 and the SSID is cleared.
3. Setup the wireless connection through Wireless Direct:
   • On the printer, touch the setup button (wrench icon), then select Network Setup Menu.
   • Select Wireless Menu, then Wireless Direct, and turn it on.
   • On your computer, click on the wireless icon in the bottom right corner and select the printer from the list to connect to.
   • Open Internet Explorer and type in the IP address (1916221) for the printer in the address bar.
   • This will load the embedded web server for the printer.
   • Select the Networking tab, then Wireless on the left-hand side.
   • Fill out all your network information, select infrastructure, your network name, password, and type of encryption.
   • Apply settings.
   • Click on the wireless icon and connect back to your network name.
4. Print out a configuration report to ensure that the IP address is valid (1. or ...).
5. Run the Add Printer Wizard or reinstall the software again.

If you have an Ethernet cable, you can also connect the printer to the wireless network by connecting it to the router. Follow these steps:

1. Connect the Ethernet cable from the printer to the router.
2. Wait for about a minute and print the configuration page to check if you get an IP address.
3. Type the IP address into Internet Explorer's address bar to access the printer's web page.
4. Select the Networking tab, then Wireless on the left-hand side.
5. Fill out all your network information, select infrastructure, your network name, password, and type of encryption.
6. Apply settings.
7. Wait for a minute to see if you get a wireless light on the printer, then print the configuration page and check the IP address again.
8. Type the IP address into Internet Explorer's address bar to access the printer's web page.
9. Run the Add Printer Wizard or reinstall the software again.

Common Questions about the LaserJet 100 Color MFP M175nw

Does LaserJet 100 Color MFP M175nw scan?

Yes, the LaserJet 100 Color MFP M175nw has scanning capabilities. You can easily scan documents or photos using the printer's flatbed scanner. Simply place your document or photo on the scanner glass, select the scanning option on the printer's control panel, and follow the on-screen instructions to complete the scan.

Choosing the right intel processor for your hp laptop

What is error 79 on LaserJet 100 Color MFP M175nw?

Error 79 on the LaserJet 100 Color MFP M175nw indicates a problem with the print job or a malformed PostScript document. To resolve this error, follow these steps:

1. Switch off the printer using the on/off switch located on the bottom of the printer.
2. Count to 10, then turn on the printer again.
3. Try printing from another application to see if the issue persists.
4. If the error continues, try breaking your document into smaller parts before printing.
5. Consider running a firmware update on the printer. Visit the HP website, select your operating system, and download the firmware update.

Resetting your LaserJet 100 Color MFP M175nw

If you are unable to connect your LaserJet 100 Color MFP M175nw to a new wireless network or experience other connectivity issues, you may need to reset the printer to its factory settings. Follow these steps to reset your printer:

1. On the printer's control panel, press the Setup button.
2. Use the arrow buttons to select the Service menu, then press the OK button.
3. Select the Restore Defaults item using the arrow buttons, then press the OK button.
4. The printer will automatically restart.

After resetting the printer, you can follow the steps mentioned earlier to connect it to your wireless network again.

In conclusion, the Hewlett Packard LaserJet 100 Color MFP M175nw is an excellent choice for those who require a reliable and efficient printer. With its wireless connectivity feature, you can easily print from any device without the hassle of cables. By following the steps outlined in this article, you can connect your printer to a wireless network, troubleshoot common issues, and reset the printer if needed. Enjoy the convenience and high-quality printing provided by the LaserJet 100 Color MFP M175nw.

Hpe & micro focus merger: bridging old & new technologies