If you own a HP EliteDesk computer and need to change the boot order to boot from a USB memory stick, you've come to the right place. In this article, we will guide you through the process of changing the BIOS settings on your HP EliteDesk to enable booting from a USB hard drive.
Step 1: Accessing the BIOS
To access the BIOS settings on your HP EliteDesk, you will need to restart your computer. During the boot process, look for a message that says press [key] to enter setup or something similar. The specific key may vary depending on your computer model, but it is typically one of the following:
- F1
- F2
- Del
- Esc
Press the corresponding key when prompted to enter the BIOS setup utility.
Step 2: Changing the Boot Order
Once you are in the BIOS setup utility, navigate to the boot or boot order section. The exact location may vary depending on your computer model.
Look for an option that allows you to change the boot order. It may be labeled as boot order, boot sequence, or something similar. Select this option.
How to switch to hdmi on hp envy 23Next, you will see a list of devices that your computer can boot from. Use the arrow keys to highlight the USB hard drive or USB memory stick option and move it to the top of the boot order list. This ensures that your computer will attempt to boot from the USB device first.
Once you have changed the boot order, save your changes and exit the BIOS setup utility. The specific key to save and exit may vary, but it is typically one of the following:
- F10
- Esc
- Enter
Press the corresponding key to save your changes and exit the BIOS.
Frequently Asked Questions
Q: How do I know if my HP EliteDesk supports booting from a USB hard drive?
A: Most modern HP EliteDesk computers support booting from a USB hard drive. However, it is always a good idea to check the specifications or user manual of your specific model to confirm.
Q: Can I change the boot order temporarily without accessing the BIOS?
A: Yes, some HP EliteDesk models allow you to change the boot order temporarily by pressing a specific key during startup. This key is often F9 or F1Consult your computer's documentation or look for on-screen prompts during startup to determine the correct key for your model.
Hewlett packard hardware guide: troubleshooting and diagnosticsQ: What should I do if my computer still doesn't boot from the USB hard drive after changing the boot order?
A: If your computer still doesn't boot from the USB hard drive after changing the boot order, there may be other factors at play. Ensure that the USB device is properly formatted and contains a bootable operating system. You may also need to check for any additional BIOS settings related to USB booting or consult HP support for further assistance.
Changing the BIOS settings on your HP EliteDesk to enable booting from a USB hard drive is a simple process. By following the steps outlined in this article, you can easily change the boot order and ensure that your computer boots from a USB device when needed. Remember to save your changes before exiting the BIOS setup utility. If you encounter any difficulties or have further questions, don't hesitate to reach out to HP support for assistance.