How to change boot hard drive in hp setup utility

Changing the boot hard drive in the Hewlett-Packard Setup Utility (also known as the BIOS) is a simple process that allows you to prioritize which drive your computer should boot from. Whether you want to change your default boot hard drive or switch from booting from a USB drive to your internal hard drive, this guide will walk you through the necessary steps.

Step 1: Determine Your BIOS Key

The first step in changing the boot hard drive in the Hewlett-Packard Setup Utility is to determine your BIOS key. This key allows you to access the BIOS control panel during startup. To find your BIOS key:

1. Open a search engine, such as Google.
2. Type in your computer's manufacturer, model name, and the phrase bios key .
3. Press Enter and search for a result that matches your search. Determine your BIOS key from the search results.
4. If you have the computer's manual, you can also find the BIOS key there. Alternatively, check the manufacturer's website for online documentation.

Note: If you have a Mac, you can skip this step as Mac computers have a different process for changing the boot drive.

Step 2: Access the Hewlett-Packard Setup Utility

Once you have determined your BIOS key, you can access the Hewlett-Packard Setup Utility by following these steps:

1. Restart your computer.
2. Press the BIOS key repeatedly as your computer starts up. This key is usually a function key such as F2 or Del.
3. The Hewlett-Packard Setup Utility will open, displaying various options and settings.

Step 3: Change the Boot Hard Drive

Now that you have accessed the Hewlett-Packard Setup Utility, you can proceed to change the boot hard drive. Follow these steps:

Hp bios guide: functions & how to access

1. Navigate to the boot or boot order section in the Hewlett-Packard Setup Utility.
2. Locate the option that allows you to change the boot order. This option may be named boot priority or boot sequence .
3. Select the option to change the boot order and prioritize your desired hard drive as the first boot device.
4. Save your changes and exit the Hewlett-Packard Setup Utility.

Once you have saved your changes and exited the Hewlett-Packard Setup Utility, your computer will now boot from the selected hard drive as the default boot device.

Frequently Asked Questions

How can I confirm that my boot hard drive has been changed?

To confirm that your boot hard drive has been changed successfully, restart your computer and observe the startup process. If your computer boots from the newly selected hard drive, then the change has been successful.

Can I change the boot hard drive back to its default setting?

Yes, you can change the boot hard drive back to its default setting by accessing the Hewlett-Packard Setup Utility and selecting the original hard drive as the first boot device. Save your changes and exit the utility to revert to the default boot hard drive.

Are there any risks involved in changing the boot hard drive?

Changing the boot hard drive in the Hewlett-Packard Setup Utility is a safe process if done correctly. However, it is important to be cautious and follow the steps outlined in this guide. Making incorrect changes to the BIOS settings can potentially cause your computer to malfunction. If you are unsure or uncomfortable with changing the boot hard drive, it is recommended to seek assistance from a professional.

The Hewlett-Packard Setup Utility provides a straightforward method for changing the boot hard drive on your computer. By following the steps outlined in this guide, you can easily prioritize which drive your computer should boot from. Remember to save your changes and exit the utility to apply the new boot hard drive settings. If you encounter any issues or are unsure about making the changes yourself, it is always recommended to seek professional assistance to avoid any potential problems.

Hp power supply failure: how to identify & address | velocity micro